High altitude balloon payload, from Sable-3 discussion Options

[djellison]

http://www.unmannedspaceflight.com/index.p...20&start=20

We began talkin about a UMSF balloon - and who know what might happen if enough people think about something hard enough, thoroughly enough and long enough.

How's about this as a starting point.
http://vpizza.org/~jmeehan/balloon/ with http://www.chem.hawaii.edu/uham/part101.html as an important regulatory start point (I'm going to look up the UK regs for this as well)

http://www.srcf.ucam.org/~cuspaceflight/nova1launch.html is also very impressive - all done in the UK

This http://www.makezine.com/blog/archive/2007/...video_podc.html is particularly impressive - I like the multiple-cameras slant.

Anyway - thought I'd get a thread going - this is an idea I like too much to let it gather dust in a corner - the one thing that I think would be nice to achieve is self-portraiture of some sort - think Beagle 2's WAM etc....perhaps in a corner of the FOV of one of/the imaging system. What sort of limit's should we set ourselves? 1kg 10x10x20cm? (sort of 2U Cubesat-on-a-diet budget)

Doug

[AndyG]

Is there an issue with expanded polystyrene at very low pressures? Or is the plastic part of the matrix mechanically strong enough to withstand the expansion of the embedded gas?

Andy, also looking at envelope materials for high altitude balloons - not the rubberised standard Met ones.

[djellison]

Is there an issue with expanded polystyrene at very low pressures?

Tens of thousands of met balloons have gone to 100k+ without any trouble of that nature - as well as probably dozens of amateur projects. They all use polystyrene or similar materials.
oug