High altitude balloon payload, from Sable-3 discussion |
High altitude balloon payload, from Sable-3 discussion |
Sep 26 2007, 11:16 PM
Post
#1
|
|
Founder Group: Chairman Posts: 14448 Joined: 8-February 04 Member No.: 1 |
http://www.unmannedspaceflight.com/index.p...20&start=20
We began talkin about a UMSF balloon - and who know what might happen if enough people think about something hard enough, thoroughly enough and long enough. How's about this as a starting point. http://vpizza.org/~jmeehan/balloon/ with http://www.chem.hawaii.edu/uham/part101.html as an important regulatory start point (I'm going to look up the UK regs for this as well) http://www.srcf.ucam.org/~cuspaceflight/nova1launch.html is also very impressive - all done in the UK This http://www.makezine.com/blog/archive/2007/...video_podc.html is particularly impressive - I like the multiple-cameras slant. Anyway - thought I'd get a thread going - this is an idea I like too much to let it gather dust in a corner - the one thing that I think would be nice to achieve is self-portraiture of some sort - think Beagle 2's WAM etc....perhaps in a corner of the FOV of one of/the imaging system. What sort of limit's should we set ourselves? 1kg 10x10x20cm? (sort of 2U Cubesat-on-a-diet budget) Doug |
|
|
Oct 2 2007, 10:22 PM
Post
#2
|
|
Founder Group: Chairman Posts: 14448 Joined: 8-February 04 Member No.: 1 |
Well - I think with these cheap cameras I've got coming - I'll tick the low-cost, wide angle boxes and bolt on a simple timer circuit. I need to establish what, if anything, is happening when the shutter is pressed ( is their current or voltage involved that might feed back from one camera to another etc - and does that even matter if they're all identical anyway )
With multiple cameras, the independent timer circuit is going to be a better bet than relying on the intervalometers of whatever type of camera we have - as I imagine they would drift out of sync with one another Power is still a 'hmm - what to do' issue - because the FM APRS Tx needs a power source as well - although it will happily run of a standalone 9V for a week or more. Amazingly - there are some C and D recharable cells that run to 5000Ahrs and 11000 Ahrs respectively. A pair of those for each camera would give us all the juice we would need (5000Ahrs is twice the capacity of an excellent AA) I was worried about the cold on the GMC - but going for the most simple possible solution - http://www.bargainboards.co.uk/P/MyCoal-Fo...mers(1252).aspx - would make the problem go away entirely. Once I have chute, box, cameras, FM APRS Tx, GPS - I can think about the mass budget and figure out how many Whr's we can get into it. If it's looking desperate then in order..things would get culled like this 3rd camera 2nd camera GMC IBS Replace 1st camera with GMC fitted internally. The bare minimum is one camera, and the FM APRS Tx & GPS. Then it's that + the IBS etc etc. If your Loox is properly dead - and ignoring the beggars can't be choosers factor - it'd be brilliant if you could scrounge a similar model so that the dead one can become a mass model. |
|
|
Oct 3 2007, 06:02 AM
Post
#3
|
|
Senior Member Group: Members Posts: 2530 Joined: 20-April 05 Member No.: 321 |
[...]
|
|
|
Lo-Fi Version | Time is now: 1st November 2024 - 12:07 AM |
RULES AND GUIDELINES Please read the Forum Rules and Guidelines before posting. IMAGE COPYRIGHT |
OPINIONS AND MODERATION Opinions expressed on UnmannedSpaceflight.com are those of the individual posters and do not necessarily reflect the opinions of UnmannedSpaceflight.com or The Planetary Society. The all-volunteer UnmannedSpaceflight.com moderation team is wholly independent of The Planetary Society. The Planetary Society has no influence over decisions made by the UnmannedSpaceflight.com moderators. |
SUPPORT THE FORUM Unmannedspaceflight.com is funded by the Planetary Society. Please consider supporting our work and many other projects by donating to the Society or becoming a member. |