HAPS-1, UMSFB1 redux |
HAPS-1, UMSFB1 redux |
Aug 2 2008, 08:32 PM
Post
#1
|
|
Founder Group: Chairman Posts: 14434 Joined: 8-February 04 Member No.: 1 |
Next weekend, if everything goes well, a 15x30cm carbon deck will fly onboard HAPS-1 -http://www.pegasushabproject.org.uk/wiki/doku.php/missions:haps:haps-1
One end of the deck will be the flight radio, the other is my responsibility, a single camera (Powershot A560 ), stand alone GPS logger (to 18km), and a small wide angle mirror so the camera can see the payload, the chute and the envelope above. Still working on a hacked firmware for the A560 - but the intention is every minute will include 15s of video, and then 5-10 stills in fairly quick succession - with the hope that the rotation of the balloon will give us some mosaics out of each section. More details, some photos etc, later in the week. |
|
|
Aug 25 2008, 04:29 PM
Post
#2
|
|
Member Group: Members Posts: 877 Joined: 7-March 05 From: Switzerland Member No.: 186 |
Fascinating venture! Congratulations!
Yeah first you may think the ride on the balloon is intense before you've seen the ride with the parachute Apropos, if it's desired, would it be possible to stabilize the payload with a kind of tail unit that run with the wind? In this sequence do you hear an airplane too? http://www.umsfbu.com/HAPS1/VIDEOS/MVI_6080.AVI A violation of the exclusion zone -------------------- |
|
|
Lo-Fi Version | Time is now: 26th September 2024 - 09:03 PM |
RULES AND GUIDELINES Please read the Forum Rules and Guidelines before posting. IMAGE COPYRIGHT |
OPINIONS AND MODERATION Opinions expressed on UnmannedSpaceflight.com are those of the individual posters and do not necessarily reflect the opinions of UnmannedSpaceflight.com or The Planetary Society. The all-volunteer UnmannedSpaceflight.com moderation team is wholly independent of The Planetary Society. The Planetary Society has no influence over decisions made by the UnmannedSpaceflight.com moderators. |
SUPPORT THE FORUM Unmannedspaceflight.com is funded by the Planetary Society. Please consider supporting our work and many other projects by donating to the Society or becoming a member. |