Viking '75 Mars Lander Construction, Looking for Viking lander design/construction information |
Viking '75 Mars Lander Construction, Looking for Viking lander design/construction information |
May 17 2012, 12:38 AM
Post
#1
|
|
Member Group: Members Posts: 101 Joined: 3-May 12 From: Massachusetts, USA Member No.: 6392 |
Greetings all! I am searching for detailed construction and design information about the NASA Viking '75 Mars project hardware, particularly for the lander, aeroshell, base cover, and bioshield. Can anyone recommend good sources? I am especially looking for engineering drawings and under-construction photographs.
To set the stage, here is an album of about 100 drawings and photos which I've collected so far. I have already read the "usual" books, such as NASA RP-1027 "Viking '75 Spacecraft Design and Test", the press kits, the scientific papers produced about the mission, a number of industry papers covering various instruments and subsystems, the major Martin Marietta books, etc. I am hoping to find additional sources. Any ideas? Also, does anyone know if there are aeroshell, base cover, or bioshield components lurking in a museum or in storage somewhere? FYI, I have visited three of the best landers still on Earth: The Proof Test Capsule in the Smithsonian NASM, the Flight Capsule 3 (backup) in the Museum of Flight near Seattle, and the Science Test Lander in the Virginia Air and Space Center. I've taken nearly 1,000 photos of the three of them (most of which are publicly available in other Picasa Web albums of mine). I've taken a few measurements, but I would dearly love to find more authoritative drawings of more hardware (interior, exterior, everything). I have begun submitting some Freedom of Information Act requests to NASA/JPL which has started to bear some trivial but kind of fun fruit. --- Update as of March 2017: During the past few years I have been fortunate enough to collect a significant amount of information on the Viking lander hardware. My thanks to a number of organizations for providing me access to their resources:
Flight Capsule 3 in Seattle Museum of Flight (756 photos) Dimensioned diagrams of the FC3 lander PTC Lander at Smithsonian NASM 2013 (466 photos) PTC Lander at Smithsonian NASM 2016 (888 photos) Lander at Virginia Air and Space Center (622 photos) Dimensioned diagrams of the VASC’s lander Lander at California Science Center (456 photos) Dimensioned diagrams of the CSC's lander Misc diagrams, unusual photos (over 350 images) Body assembly blueprints Collector Head Shroud Unit at NASA LaRC (99 photos) Biology instrument at Cleveland MoNH (36 photos) Meteorology Sensor Assembly (60 photos) Meteorology Electronics Assembly (22 photos) Tape Recorder (53 photos) High Gain Antenna photos and measurements (96 images) XRFS Instrument (42 images) Viking lander contractor historic scale model (14 images) My Viking project documents collection The main focus of my efforts during the past few years has been to create an accurate and high-fidelity digital 3D model of the Viking lander. I've chosen to use the SketchUp software to build the model because a near-full-featured free version is available, allowing other people to use my model. The 3D model itself, as a work-in-progress, is available via DropBox. I update that model file periodically as major elements get added. I've created an album containing numerous renderings of digital model components, and I have a YouTube channel with some videos about the modeling project. I have also uploaded the lander core body and the Surface Sampler Collector Head to the SketchUp 3D Warehouse so that other people can easily access those components (the 3D Warehouse can be accessed from within SketchUp, or via web browser). The file on DropBox lister earlier contains those components and others. -- Tom |
|
|
Jun 21 2012, 02:40 AM
Post
#2
|
|
Member Group: Members Posts: 101 Joined: 3-May 12 From: Massachusetts, USA Member No.: 6392 |
I have begun creating a 3D model of the Viking lander, attempting to be fairly detailed and as accurate as I can manage (based on the references I have, including some 900 photographs I've taken of three authentic landers). I recently completed my first pass at the lander's sidebeam #1, which forms one third of the lander's hexagonal body. Here is a comparison between renderings of the model and photographs of the backup lander body in the Museum of Flight near Seattle.
The model linked above represents the solid machined aluminum beam without any of the brackets, fittings, and flanges which are bolted or screwed to the sidebeam. The attachment points for all those brackets etc. are represented as carefully-located bolt holes. As I understand it, each sidebeam consists of a lander-body long side and half of the adjacent two short sides. The three sidebeams are apparently connected to each other via the vertical landing leg primary support fittings, which are bolted across and under the joints between adjacent sidebeams. The top and bottom cover plates also help to hold the body together; fastener locations for those plates are included in the model. Proportions of the model are based on dimensions I have taken from some authentic landers, various published references, and a lot of photo interpretation and cross-check. I have been careful to ensure that the various points of contact between the lander and its aeroshell are reconciled (three large bolts, one under each leg primary support fitting; six shear points, two under each sidebeam; and three guiderail roller assemblies). If anyone has corrections or questions, I would be pleased to address them! |
|
|
Lo-Fi Version | Time is now: 14th June 2024 - 02:33 PM |
RULES AND GUIDELINES Please read the Forum Rules and Guidelines before posting. IMAGE COPYRIGHT |
OPINIONS AND MODERATION Opinions expressed on UnmannedSpaceflight.com are those of the individual posters and do not necessarily reflect the opinions of UnmannedSpaceflight.com or The Planetary Society. The all-volunteer UnmannedSpaceflight.com moderation team is wholly independent of The Planetary Society. The Planetary Society has no influence over decisions made by the UnmannedSpaceflight.com moderators. |
SUPPORT THE FORUM Unmannedspaceflight.com is funded by the Planetary Society. Please consider supporting our work and many other projects by donating to the Society or becoming a member. |