ROVER WHEELS: Monitoring changes over time, NOTE: Read back through the thread to avoid repeating misconceptions |
ROVER WHEELS: Monitoring changes over time, NOTE: Read back through the thread to avoid repeating misconceptions |
May 16 2013, 08:35 AM
Post
#1
|
||
Junior Member Group: Members Posts: 22 Joined: 10-August 12 From: Australia Member No.: 6530 |
[MOD NOTE: This thread follows on a post by Ed Truthan containing a MAHLI mosaic of MSL wheels taken on sol 275.]
Ed: zooming in on that marvellous underbelly MAHLI montage, there appears to be further (and previously noted) deformation of the wheel surfaces. Damage is most evident in the view of the front-left wheel inner surface. Such wear has previously been discussed and concerns allayed. Nevertheless, the front left wheel surface *appears* to have been punctured. We've only done 700 meters, and have 7000 more to get to Mt Sharp..... Given that more odometry has now accumulated, is any (re-)new(ed) concern valid? DeanM |
|
|
||
May 16 2013, 03:59 PM
Post
#2
|
|
Senior Member Group: Members Posts: 1619 Joined: 12-February 06 From: Bergerac - FR Member No.: 678 |
QUOTE The dents may be reflecting bits of bright sky which makes it look like there are punctures. It can't be. We are seeing these things in shadow, and from where there are, impossible to have the sky in sight. Because of the wheel itself, and the rover body. I'm wondering about the material used to build theses wheels. At first, I thought they where designed in the exact same way as the MER's : a metalic monobloc. -------------------- |
|
|
May 17 2013, 09:36 PM
Post
#3
|
|
Founder Group: Chairman Posts: 14434 Joined: 8-February 04 Member No.: 1 |
It can't be It is. That 'hole' is a dent, the stress of the dent has popped the anodized coating off the inside of the wheel and we have bare aluminum reflecting the sun. That dent isn't in shadow. Those that are can reflect the bright martian sky off them. Just because something is in shadow - it doesn't mean it can't 'see the sky'. Look at it - it's not even the same color as the terrain behind it. And even if it IS punctured - it doesn't matter. Once of the test-bed rovers at JPL had flight like wheels whilst dealing with 3x the effective weight of a real rover. The wheels were punctured, dent ridden, ripped, torn, dinged, bashed, smashed, crunched. You could put your finger thru the holes in places - you could see clean thru them. And they still worked absolutely fine. That testbed now has tougher wheels simply to deal with terrestrial gravity. The lightweight scarecrow rover has flightlike wheels. I'm not sure how long it's going to take until saying 'the wheels are fine' before it gets boring. Infact, I think it might already have passed. |
|
|
May 18 2013, 03:10 PM
Post
#4
|
|
Senior Member Group: Members Posts: 4256 Joined: 17-January 05 Member No.: 152 |
Once of the test-bed rovers at JPL had flight like wheels whilst dealing with 3x the effective weight of a real rover. The wheels were punctured, dent ridden, ripped, torn, dinged, bashed, smashed, crunched. You could put your finger thru the holes in places - you could see clean thru them. And they still worked absolutely fine. Here's a pic showing the VSTB rover with that damage. Worth a thousand words. |
|
|
Lo-Fi Version | Time is now: 22nd September 2024 - 08:17 AM |
RULES AND GUIDELINES Please read the Forum Rules and Guidelines before posting. IMAGE COPYRIGHT |
OPINIONS AND MODERATION Opinions expressed on UnmannedSpaceflight.com are those of the individual posters and do not necessarily reflect the opinions of UnmannedSpaceflight.com or The Planetary Society. The all-volunteer UnmannedSpaceflight.com moderation team is wholly independent of The Planetary Society. The Planetary Society has no influence over decisions made by the UnmannedSpaceflight.com moderators. |
SUPPORT THE FORUM Unmannedspaceflight.com is funded by the Planetary Society. Please consider supporting our work and many other projects by donating to the Society or becoming a member. |