Voyager 2 Saturn Revisited, Still a lot to be processed and reprocessed Options

[Bjorn Jonsson]

Emily recently mentioned in her blog the availability of calibrated and geometrically corrected Voyager images. Actually I had 'discovered' this dataset several months earlier but then managed to completely forget about it. Now I decided to do something so I downloaded volume 37 and decided to do some quick-and-dirty processing, mainly to check if it was feasible to do a very high resolution map (probably 25 degrees/pixel to match my Cassini map of the southern hemisphere) of Saturn's entire northern hemisphere by colorizing green filtered images using lower resolution color data I processed several years ago - at the resolution I want only green filtered images are available.

This was successful, opening the door to a new 'monster project': A very high resolution full color map of Saturn's entire northern hemisphere.

First a color composite made from wide angle orange, green and blue images:

This one was made from images C4386547_GEOMED.IMG, C4386554_GEOMED.IMG and C4386608_GEOMED.IMG. I adjusted the color to something more realistic than I initially got and removed some reseau marks in Photoshop that were visible, especially near ring edges and Saturn's limb. Some color fringing was also visible on Saturn's disk due to Saturn's rotation while the three images were obtained; I removed this by cloning the color of adjacent areas. The spokes in the rings presented similar problems.

I then colorized a green filtered image obtained at a similar time as the wide angle images above. This was the result:

The image should be fairly realistic and I was happy with the result, especially because I didn't do this very carefully - something better should be possible.

Finally the same image sharpened with an unsharp mask:

Lots of small scale details are visible, especially near the pole.

I will probably post several additional Voyager Saturn images in the next several weeks. As previously mentioned, the plan now is to do a very high resolution map of Saturn's entire northern hemisphere based on these calibrated and rectified images. This means reprojecting the images to simple cylindrical projection. To do this I need to know the viewing geometry. Does anyone know if this information is available somewhere (or if not, if it's likely to ever become available)? I have some SPICE kernels which give me Voyager 2's location relative to Saturn. These are probably fairly accurate. However, the limited instrument pointing information I have is very inaccurate so it's useless to me. I can reverse engineer the viewing geometry/pointing but it's a lot of extra work.

[Ian R]

https://vimeo.com/665079286

Over the course of 43 hours, in June 1981, the Voyager 2 spacecraft captured over 530 monochrome frames of Saturn with its narrow-angle camera. Aligned and colorized using subsequent Voyager data, these frames reveal cloud features, ring spokes, and eight of the gas giant's attendant moons, ranging from massive Titan to diminutive Epimetheus.

The sequence has been looped multiple times here, sometimes with additive frames to reveal the moons' orbital paths. (Note the relatively high inclination of Mimas's orbit compared to the other satellites.)

This sequence was produced using calibrated data sourced from OPUS (https://opus.pds-rings.seti.org).
______________________
Credit: NASA/JPL/Caltech/Ian Regan