Chandrayaan 2 TMC 3D modelling |
![]() ![]() |
Chandrayaan 2 TMC 3D modelling |
![]()
Post
#1
|
|||
Junior Member ![]() ![]() Group: Members Posts: 47 Joined: 23-July 11 Member No.: 6083 ![]() |
I have a question about constructing 3D models using the latest TMC data. I've tried using QGIS (and also Blender) to generate them using the DTM-OTH pairs available, and it seems that the only way a sensible looking model can be geneated is by reducing the Z axuis exaggeration by something like 0.00025. I'm using the QGIS2threejs plugin, and that multiplication value is pure guesswork based on "what looks right".
Does anyone have an explanation as to why the original geotiffs have such a huge vertical displacement, or a way of working out what the exact value should be? Attached are images showig the original and adjusted values for a pass covering the Descartes region. |
||
|
|||
![]()
Post
#2
|
|
![]() Member ![]() ![]() ![]() Group: Members Posts: 156 Joined: 22-May 09 From: Ireland Member No.: 4792 ![]() |
There is some information concerning this 2012 paper DEM Generation for Lunar Surface using Chandrayaan-1 TMC Triplet Data , however, it is old research so don't be disappointed if the answer isn't there.
I've never used QGIS, but have generated many 3D DEMs of the lunar surface using simple 3D graphical softwares (don't ask, as there's a medley of to confuse) that can tackle PNG DEMs etc. John Moore |
|
|
![]()
Post
#3
|
|
Member ![]() ![]() ![]() Group: Members Posts: 890 Joined: 18-November 08 Member No.: 4489 ![]() |
i do not use qgis all that much , but use Blender 3.4 all the time to make a mesh from a DEM
the exaggeration for a 16 bit unsigned tiff ( 32 bit floats seam to be broken ) is set to about 0.05 to 0.07 "Does anyone have an explanation as to why the original geotiffs have such a huge vertical displacement, " most geo tif's are in radian / meters and are in 16 bit signed image format and for use in blender they need to be in 16 bit unsigned . with blender it uses " blender units" the grid you see so for a good looking mesh you need to reduce the height to a rather low value - like 0.05 |
|
|
![]() ![]() |
![]() |
Lo-Fi Version | Time is now: 16th May 2024 - 06:53 AM |
RULES AND GUIDELINES Please read the Forum Rules and Guidelines before posting. IMAGE COPYRIGHT |
OPINIONS AND MODERATION Opinions expressed on UnmannedSpaceflight.com are those of the individual posters and do not necessarily reflect the opinions of UnmannedSpaceflight.com or The Planetary Society. The all-volunteer UnmannedSpaceflight.com moderation team is wholly independent of The Planetary Society. The Planetary Society has no influence over decisions made by the UnmannedSpaceflight.com moderators. |
SUPPORT THE FORUM Unmannedspaceflight.com is funded by the Planetary Society. Please consider supporting our work and many other projects by donating to the Society or becoming a member. |
![]() |