3D models of Mars rovers |
3D models of Mars rovers |
Sep 9 2008, 01:05 PM
Post
#1
|
|
Newbie Group: Members Posts: 1 Joined: 8-September 08 Member No.: 4333 |
Hello All,
I am interested in building a robotic rover as a hobby. (I am robotics enthusiastic) Do you know any publicly available CAD files for any Mars rover? I am particularly interested in details of "rocker-bogie" design. Thanks, Albert Goodwill albertgoodwill at gmail com |
|
|
Nov 10 2008, 08:25 PM
Post
#2
|
|
Founder Group: Chairman Posts: 14432 Joined: 8-February 04 Member No.: 1 |
Wheel diameter at the face is 250mm, and at the cleats, 260mm (the wheels are slightly domed across their width) I would expect cleat-marks to be 78.5cm apart.
Wheel width is 160mm - and the distance between the insides of the wheels is 900mm for the front and rear wheels, 790 for the middle wheels. Including 2x 160mm wheel width - the total width between hubs of the front or rear wheels is 1220mm Roughly. |
|
|
Lo-Fi Version | Time is now: 25th April 2024 - 05:43 PM |
RULES AND GUIDELINES Please read the Forum Rules and Guidelines before posting. IMAGE COPYRIGHT |
OPINIONS AND MODERATION Opinions expressed on UnmannedSpaceflight.com are those of the individual posters and do not necessarily reflect the opinions of UnmannedSpaceflight.com or The Planetary Society. The all-volunteer UnmannedSpaceflight.com moderation team is wholly independent of The Planetary Society. The Planetary Society has no influence over decisions made by the UnmannedSpaceflight.com moderators. |
SUPPORT THE FORUM Unmannedspaceflight.com is funded by the Planetary Society. Please consider supporting our work and many other projects by donating to the Society or becoming a member. |