IPB

Welcome Guest ( Log In | Register )

 
Reply to this topicStart new topic
Dedicated Ring Missions, proposals and discussions
jasedm
post Jan 19 2017, 09:19 PM
Post #1


Member
***

Group: Members
Posts: 655
Joined: 22-January 06
Member No.: 655



QUOTE (Explorer1 @ Jan 18 2017, 08:06 AM) *
a dedicated ring mission...


I would personally love to see this.

Would it be possible to insert a probe into an orbit that is very slightly (a couple of degrees or so) above the ring-plane, and start out after insertion burn around Enceladus' orbit. The probe could conduct a set of detailed studies there before with repeated burns, spiralling slowly inwards, thereby intersecting the orbits of Mimas, Janus/Epimetheus, and so on, before skimming a few kilometres above the rings all the way in.
At ~5km or so above the ring plane with a very decent camera might it be possible to resolve individual ring particles in the order of a few tens of metres?
Go to the top of the page
 
+Quote Post
fredk
post Jan 19 2017, 09:35 PM
Post #2


Senior Member
****

Group: Members
Posts: 4245
Joined: 17-January 05
Member No.: 152



QUOTE (jasedm @ Jan 19 2017, 10:19 PM) *
Would it be possible to insert a probe into an orbit that is very slightly (a couple of degrees or so) above the ring-plane

Do you mean can a probe orbit parallel to, but outside of, the rings? If that's what you mean, the answer is no. Anything orbiting Saturn must be coplanar with Saturn's centre of mass, according to Newton. So you'd have to intersect the ring plane somewhere. I think the best you could do would be to cross the ring plane just outside the rings or in a ring gap.

Staying parallel to but outside the ring plane is possible if you apply thrust to keep you there, but I don't think you could do that for long with reasonable amounts of fuel. But that's not entirely clear to me, since the fuel required would drop the closer to the rings you got. So a path just 100 metres, say, above the ring plane may not require much thrust. That's a calculation someone could probably do...
Go to the top of the page
 
+Quote Post
Explorer1
post Jan 19 2017, 09:57 PM
Post #3


Senior Member
****

Group: Members
Posts: 2073
Joined: 13-February 10
From: Ontario
Member No.: 5221



Are any of the ring gaps actually clear enough for a probe to stay in and be safe from particle impacts? They would be hopefully low velocity, and we know that Rosetta survived a long period inside a similar environment without any need for shielding.
Or perhaps just a much more powerful camera (say HiRise style) on a future orbiter with a similar trajectory, so still keeping a safe distance while getting better resolution? Just wild speculation here...
Go to the top of the page
 
+Quote Post
jasedm
post Jan 19 2017, 10:03 PM
Post #4


Member
***

Group: Members
Posts: 655
Joined: 22-January 06
Member No.: 655



QUOTE (fredk @ Jan 19 2017, 09:35 PM) *
Do you mean can a probe orbit parallel to, but outside of, the rings?


Yes - excuse my ignorance smile.gif I imagined a fairly decent bi-propellant engine for orbit insertion and major orbit-tweaking burns, and an ion engine to gently nudge and shape the orbit, achieving a continuous inward spiral.
Go to the top of the page
 
+Quote Post
HSchirmer
post Jan 19 2017, 11:40 PM
Post #5


Member
***

Group: Members
Posts: 684
Joined: 24-July 15
Member No.: 7619



QUOTE (jasedm @ Jan 19 2017, 10:03 PM) *
Yes - excuse my ignorance smile.gif I imagined a fairly decent bi-propellant engine for orbit insertion and major orbit-tweaking burns, and an ion engine to gently nudge and shape the orbit, achieving a continuous inward spiral.


Hmm, a light sail to allow some above-the-rings station keeping?
Go to the top of the page
 
+Quote Post
mchan
post Jan 20 2017, 01:54 AM
Post #6


Member
***

Group: Members
Posts: 599
Joined: 26-August 05
Member No.: 476



QUOTE (fredk @ Jan 19 2017, 02:35 PM) *
... you'd have to intersect the ring plane somewhere. I think the best you could do would be to cross the ring plane just outside the rings or in a ring gap.


A spacecraft that crosses the ring plane in the clear outside of F-ring and inside of D-ring with a very low inclination would have a "ring-skimming" orbit. It would be closest to the rings (edge of F- and D-rings) at apoapsis and periapsis and farthest from the rings (somewhere in middle of B-ring) near midpoint between apoapsis and periapsis.

The spacecraft would alternately skim over the north side and south side of the rings over half the orbit. At any time other than equinox, half the orbit would be over sunlit side and half would be over backlit side (discounting the passage thru Saturn's shadow). Guesstimate orbital period under 12 hours. Power, communications, and image smearing are probably challenging.
Go to the top of the page
 
+Quote Post
toddbronco2
post Jan 26 2017, 04:28 PM
Post #7


Junior Member
**

Group: Members
Posts: 33
Joined: 25-March 10
Member No.: 5281



QUOTE (jasedm @ Jan 19 2017, 02:03 PM) *
Yes - excuse my ignorance smile.gif I imagined a fairly decent bi-propellant engine for orbit insertion and major orbit-tweaking burns, and an ion engine to gently nudge and shape the orbit, achieving a continuous inward spiral.


There actually was a very interesting proposal called the Saturn Ring Observer that was planned to do exactly what you just suggested; Using low-thrust electric propulsion to maintain a perpetual small offset above the rings as it slowly spiraled in toward Saturn.

http://sites.nationalacademies.org/cs/grou.../ssb_059328.pdf
Go to the top of the page
 
+Quote Post
Holder of the Tw...
post Jan 26 2017, 06:56 PM
Post #8


Member
***

Group: Members
Posts: 540
Joined: 17-November 05
From: Oklahoma
Member No.: 557



Hmmm. I wonder if anyone has looked into the feasibility of using an electric tether to hold a spacecraft up above the rings using Saturn's magnetic field? If it could be done, that part at least (hovering) could be propellantless. I couldn't find any mention of it in the study paper.
Go to the top of the page
 
+Quote Post
nprev
post Jan 27 2017, 03:10 AM
Post #9


Merciless Robot
****

Group: Admin
Posts: 8783
Joined: 8-December 05
From: Los Angeles
Member No.: 602



This thread is for discussion of possible future missions to study the rings. Please review rule 1.9 re SF engineering before posting. Have fun! smile.gif


--------------------
A few will take this knowledge and use this power of a dream realized as a force for change, an impetus for further discovery to make less ancient dreams real.
Go to the top of the page
 
+Quote Post
Holder of the Tw...
post Jan 27 2017, 02:08 PM
Post #10


Member
***

Group: Members
Posts: 540
Joined: 17-November 05
From: Oklahoma
Member No.: 557



Just a quick note to clarify that discussions of using electric tethers to alter orbits does not fall under rule 1.9. A Japanese HTV cargo craft on its way down from the ISS is going to test one out next week, in fact.

ADMIN: Technologies in active development like that are fine. Fusion rocket motors, warp drives and such are not. smile.gif
Go to the top of the page
 
+Quote Post
scalbers
post Jan 27 2017, 06:09 PM
Post #11


Senior Member
****

Group: Members
Posts: 1620
Joined: 5-March 05
From: Boulder, CO
Member No.: 184



I recall tethers were tested quite some time ago on the ISS as well (though this might bump into Rule 1.1).


--------------------
Steve [ my home page and planetary maps page ]
Go to the top of the page
 
+Quote Post
HSchirmer
post Jan 27 2017, 07:27 PM
Post #12


Member
***

Group: Members
Posts: 684
Joined: 24-July 15
Member No.: 7619



QUOTE (toddbronco2 @ Jan 26 2017, 04:28 PM) *
There actually was a very interesting proposal called the Saturn Ring Observer that was planned to do exactly what you just suggested; Using low-thrust electric propulsion to maintain a perpetual small offset above the rings as it slowly spiraled in toward Saturn.

http://sites.nationalacademies.org/cs/grou.../ssb_059328.pdf


Hmm, what about a orbit around the L1 point of Mimas?

Then keep skipping into the rings along the L1 points of smaller and smaller satellites,
Mimas, Epimethius, Prometheus, Pan?
Go to the top of the page
 
+Quote Post

Reply to this topicStart new topic

 



RSS Lo-Fi Version Time is now: 19th March 2024 - 09:13 AM
RULES AND GUIDELINES
Please read the Forum Rules and Guidelines before posting.

IMAGE COPYRIGHT
Images posted on UnmannedSpaceflight.com may be copyrighted. Do not reproduce without permission. Read here for further information on space images and copyright.

OPINIONS AND MODERATION
Opinions expressed on UnmannedSpaceflight.com are those of the individual posters and do not necessarily reflect the opinions of UnmannedSpaceflight.com or The Planetary Society. The all-volunteer UnmannedSpaceflight.com moderation team is wholly independent of The Planetary Society. The Planetary Society has no influence over decisions made by the UnmannedSpaceflight.com moderators.
SUPPORT THE FORUM
Unmannedspaceflight.com is funded by the Planetary Society. Please consider supporting our work and many other projects by donating to the Society or becoming a member.