[X] My Assistant

[Bjorn Jonsson]

This may be a bit specialized to say the least but if anyone can help I'd be grateful. I have now downloaded most of the raw Cassini images from the PDS imaging node plus the coiss_0011 volume from the PDS rings node. Volume coiss_0011 contains calibration stuff like flatfields, masks for removing dust rings and mottling etc.

I have been implementing calibration code which will eventually be added to my IMG2PNG utility, assuming there is interest in this. This utility is mentioned in this thread: http://www.unmannedspaceflight.com/index.p...wtopic=291&st=0 .

My code has been largely based on the CISSCAL source code on volume coiss_0011 but cleaned up a bit and rewritten using C++. This has been very successful despite a wide variety of rather arcane data formats on the coiss_0011 volume (bigendians, littleendians, IEEE and VAX floating point numbers, a weird TIFF file containing floating point data etc.). For example, flatfielding, linearization etc. works very well and in particular, for images of low contrast targets like Saturn and Titan makes a big difference if the images are to be greatly sharpened (no mottling or dustrings).

There is one problem though: Darkcurrent subtraction. This is a problem, the CISSCAL code for this is somewhat complex and may contain some bugs - what it does is to generate 'synthetic' darkcurrent images based on a model taking various factors into account. These 'synthetic' darkcurrent images get written to disk so each of them only has to be generated once. If anyone has 'sample' synthetic darkcurrent images I would greatly appreciate if at least one of these could be emailed to me since without this it is almost impossible for me to know if the images my code is generating are correct.

These images should (assuming my code is correct !) have names like \calib\darkcurrent\darks04228\n_dark027102410100_04228.img where '\calib' is in my case the calib-directory on the coiss_0011 DVD volume (which is lying on my hard disk).

Bjorn

[edstrick]

The US Geologic Survey's Branch of AstroGeology's planetary data system has or used to have the ISIS planetary and remote sensing software available for non-commercial use. Original versions were for Sun Solaris, but there was a version specifically for RedHat Linux <they knew it worked on that> 5.something version about 5 years ago.

It can handle image cubes, like Galileo/Cassini infrared mapping spectometer data and all sorts of stuff and the PDS lables and image formats are normal as jpg to it.

I've been so up to my armpits and sinking the last few years with elderly parents needing more and more help, I've never gotten the time to play with it, but it should be out there and worth trying.