Looks like the Deep Impact list has been revived. Posting here for others to get back on board:

**********************************************************************
EPOXI E-News #1 May 2008
**********************************************************************

WELCOME BACK!

Did you know that the Deep Impact Flyby Spacecraft has a new assignment? The
EPOXI mission combines two exciting science investigations in an entirely
new mission that re-uses the Deep Impact spacecraft. The Extrasolar Planet
Observation and Characterization (EPOCh) investigation will observe stars
that have known transiting giant planets. The Deep Impact Extended
Investigation (DIXI) of comets observes comet 103P/Hartley 2 during a close
flyby in October 2010.

The education and public outreach team decided to get back in touch with our
Deep Impact friends and begin sending out newsletters again to keep you
informed of these two exciting investigations! During the two years since
our last newsletter for Deep Impact, the science team has stayed busy
continuing to do more analysis on the data collected in July 2005. The
science team also proposed and was awarded an extended mission teaming up
with a group from Goddard Space Flight Center.
EPOXI website: http://epoxi.umd.edu/
Mission Overview: http://epoxi.umd.edu/1mission/index.shtml
Press Releases: http://epoxi.umd.edu/7press/index.shtml
DI Results: http://deepimpact.umd.edu/results/

**********************************************************************
MISSION STATUS

Dr. Deming, Principal Investigator (PI) for the EPOCh portion of the
mission, sends us the latest mission status report in which he tells us
about the current observing target GJ436. “This is an exciting time for
EPOCh, as we search for an exo-Earth orbiting a stellar neighbor of our
Sun!” reports Dr Deming. He also talks about the plans to observe a very
special planet in late May and early June.

Read his status report as well as past reports from other team members at
http://epoxi.umd.edu/1mission/status.shtml

**********************************************************************
EPOCh TARGETS

The EPOCh component of the EPOXI mission will carefully study a small number
of stars in order to learn more about planets that we know are orbiting
those stars by watching the planets as they transit (cross in front of) the
star. EPOCh will also search for clues to other planets that might be
orbiting the same stars.

Read more about the EPOCh science targets to find out which stars are being
observed.
http://epoxi.umd.edu/2science/targets.shtml

**********************************************************************
PLANET QUEST

Are we alone?
For centuries, human beings have pondered this question. Medieval scholars
speculated that other worlds must exist and that some would harbor other
forms of life. In our time, advances in science and technology have brought
us to the threshold of finding an answer to this timeless question.
The recent discovery of numerous planets around stars other than the sun
confirms that our solar system is not unique. Indeed, these "exoplanets"
appear to be common in our galactic neighborhood.
The EPOCh investigation is part of a larger family of missions studying
extrasolar planets. Learn more at the Jet Propulsion Lab Planet Quest Web site.
http://planetquest.jpl.nasa.gov/index.cfm

**********************************************************************
OBSERVING CHALLENGE

The transits that will be studied for EPOCh are extremely difficult to
observe because the change in brightness is very small and requires high
precision photometry that can be accomplished with instruments on the Deep
Impact spacecraft. Observers on Earth can still take a look at the stars in
the night time sky. The selected stars are also pretty dim because we don’t
want them to saturate or over expose the spacecraft instruments but they are
bright enough to be visible in amateur telescopes if the sky conditions are
good and the skies are dark.

Like people, stars have multiple identifiers. EPOCh’s first target was a
star labeled as HAT-P-4 by the scientists observing it. They made their own
list of target stars so that was their shorthand name. But HAT-P-4 has
numerous other names which are more useful in identifying it in other databases.
HAT-P-4 = SAO 64638 = TYC 2569-1599-1 is a magnitude 11, G-class star
located in the constellation Boötes.
Chart: http://epoxi.umd.edu/2science/challenge.shtml

**********************************************************************
SUBSCRIPTION INFORMATION

Please forward this e-mail to others interested in NASA missions. New
subscribers may join the EPOXI Mission e-news mailing list on our website
at: http://epoxi.umd.edu/6outreach/newsletter.shtml

EPOXI's Spacecraft Observes the Earth-Moon System

Wow, it got a beautiful shot. I can't wait for the raw data release.

Here's a simulated view:

I still can't wait for the raw data. There really is a lot of data in the images. For example, here is a cleanup of a view of the moon from shortly after launch.

Click to view attachment

Here is the earth moon shot using the same technique I used on the lunar shot.

Click to view attachment

Two papers about EPOXI published yesterday by arxiv:
The NASA EPOXI mission of opportunity to gather ultraprecise photometry of known transiting exoplanets
Preliminary Results on HAT-P-4, TrES-3, XO-2, and GJ 436 from the NASA EPOXI Mission

As a member of the EPOXI flight team, I am astonished that this data has been made public yet. The EPOCh portion of EPOXI finished 8/31/08 (photometry of transiting hot-jupiters and observing Earth as an exo-planet analog). The science team has had over 7 months to analyze the data and the only thing made public is the lunar transit animation. Granted, that's pretty sweet, but you'd think they would release some more data.

I met Doug (UMSF founder) on Tuesday (3/17) when he was here at JPL. I'm impressed with what you all are doing on the site with MER data, among the other missions. I'd love to see UMSF participate real-time with the Hartley-2 flyby similar to the DI prime mission flyby of Tempel-1.

Let me talk with our Public Outreach people and our science team and I'll see if I can get any data released to the "world". What exactly would you guys want? .jpgs? raw binary images? Please let me know and I'll see if I can get any data released.

Many thanks and keep up the great work! I always like to see people excited about EPOXI when most people at JPL don't even know we exist!

~Rich

p.s. we just published a paper on how we did the EPOCh observations at the 2009 IEEE Aerospace Conference. I'm not sure if the paper is available to the public free-of-charge, but I'll see if I can get a copy of the paper and presentation out...

I'm waiting for the lunar transit images myself. I read the archival plan document which stated EPOCh data was supposed to be delivered to PDS back in October so I was expecting the peer review and release to come in January. It's now March and still no luck. Is there perhaps a delivery planned for April or is it postponed indefinitely?

Welcome aboard Rich, good to have you here! Anything you can drop into our eager little hands will be greatly appreciated!

Of course image processing mavens dislike JPEGs because of the compression artifacts, but raw binaries are inaccessible except to a few people with the technical knowledge necessary to open them. A good compromise is PNG, which most browsers display just as easily as JPEG (so it's accessible to the less-skilled) but which don't suffer from compression artifacts. (PNGs can also be 16-bit, while JPEGs max out at 8 bits per channel. I haven't looked into the DI camera system lately so I don't recall what bit depth it's capable of and don't know whether that matters.) On top of that, metadata for each image is valuable, starting with the simplest stuff like date/time of the observation, target, and filter choices. Some of the more skilled people here will gladly ingest whatever metadata you can get away with releasing -- either as detached headers for each image, or just one text file containing the data for all the images, like you get with the PDS INDEX.TAB files, will make people here jump for joy.

--Emily

Hello Rich, welcome to UMSF. I am running realtime simulations for current interplanetary spacemissions, including EPOXI, so I am greatly interested in up-to-date SPICE kernels to extract trajectory data (spk_od224_NoBurn-full.bsp is the current file, right?) and/or in up-to-date Horizons data (which seems to be there). I also include a mission timeline, so I am very keen on any mission events (TCM's, particular observations, etc) that I can include in the timeline, preferably in advance of them happening.

I have noted that EPOXI is not on the Solar System Simulator (http://space.jpl.nasa.gov/) ... Deep Impact is but gives an error if you enter today's date ... which I think would be a good tool to have (both for the general public and to incorporate images into my simulations). So maybe you could suggest to the team at the Solar System Simulator to have EPOXI enabled :-)

Good luck with your mission!

Daniel, the SPICE kernel you have is slightly out of date. Your version was generated before TCM-14 without the TCM-14 burn. You want to be using spk_drm224_Burn-full.bin That's the latest and greatest o.d. solution. Where are you getting these by the way? Are they public?

I sent an e-mail to the webmaster for space.jpl.nasa.gov and asked him to add EPOXI. He hasn't gotten back to me, but I hope we'll get EPOXI in there.

I talked to the P.I. about getting EPOCh images released to the public. They're thought is, "why should we release them is no one will want to look at them because they're ugly, fuzzy images, especially in .jpg format." The data should be published to the PDS next month and made public about a month after. So, images around May perhaps... don't hold your breath.

Oh, and we're going to do another Earth observation of the North pole on Friday 3/27/09. It should give us some more pretty pictures

~Rich

I would definitely be interested in seeing it!

I called the ethics office on Thursday. I don't know the legalities of posting it here. I think I can get the presentation here, but I'm not sure about the paper. I'll get them up as soon as I know if it's legal. The paper is entitled "The Contingency of Success: Deep Impact's Planet Hunt" published at the 2009 IEEE Aerospace Conference in Big Sky, MT if you want to search for it. If you find a url to it, be sure to post it here.

~Rich

So I just got a blessing from the Ethics office. Attached is the presentation on EPOCh observations I gave at the IEEE conference in Big Sky. Feel free to bug me with questions. I'm continuing to research the legal aspects of posting the paper here too. Stay tuned!

Click to view attachment

~Rich

Dear Rich,


Thanks so much for the clarification. I will incorporate the file into the next data update.



Yes the SPICE kernels are public and for most missions they can be found at http://naif.jpl.nasa.gov/naif/
EPOXI, still under the Deep Impact name, is listed under the Comet and Asteroid missions at http://naif.jpl.nasa.gov/naif/data_comet.html
The Horizons system at http://ssd.jpl.nasa.gov/?horizons also runs on SPICE kernels but occasionally it is not updated. At the moment it seems to use



Thanks.

If you wish to include timeline events, feel free to send them to me and I'll upload them in due course. Anything to create a grain of outreach for your mission :-)

I myself prefer PDS formatted data and there are probably lots of people here that also prefer it but PNGs are better known and are probably the best option to make the data easier to use for lots of people. As previously discussed, PNGs are far better than JPGs due to the absence of compression artifacts and the fact that they can be 16 bits/pixel when needed. Their only drawback compared to JPGs is bigger files.

Sorry Bjorn. I don't think the project will release any EPOXI data to the PDS until April and it may not get released to the public until May. You'll have to stay perched on the edge of your computer chair until then. I'll see if I can get anything released to the world, but you may have to settle for .jpgs. Sorry! .jpgs are better than nothing!

~Rich

Mission update:

FYI, we will be taking more pictures of the Earth tomorrow in a similar fashion to how the previous Earth observations were performed (in fact, we're using the exact same sequences, fancy that). However, we will be significantly closer than the Earth Observation that took the lunar transit movie (17 Gm compared to 50 Gm (that's giga-meters, or Mkm (that's Mega-kilometers) (and yes, that's a subnested parenthetic remark)). Since the spacecraft is now north of the ecliptic plane, we will be looking down on the Earth's north pole. A simulated image of what we might see has been floating around JPL. I'll ask around to see if I can post it.

Images will be coming down Saturday.

~Rich

Sweet. Can't wait to see the pics. --Emily

dmueller: It's amazing what a simple e-mail does EPOXI is now in the JPL Solar System Simulator! Thanks for pointing that out to us.

In other news, the images from this weekend's Earth Observation are now on the ground and they look great!

Thanks for asking, Rich! Have updated the EPOXI Realtime Simulation accordingly.

Incidentally I figured out how to make my website tweet to my Twitter. In due course I hope to get it to periodically tweet mission updates onto my Twitter. Standby.

Hi all,

I just noticed a new article on the EPOXI website by the EPOCh P.I. Drake Deming:

http://epoxi.umd.edu/2science/alienmaps.shtml

Enjoy!

~Rich

There was a presentation on the same subject here: http://www.astro.washington.edu/users/cowa..._lunch_talk.ppt but it has been removed. It is cached on Google in html
http://209.85.129.132/search?q=cache:wdXK3..._lunch_talk.ppt

Selected trajectory information about some missions (including EPOXI) are now tweeting automatically to my Twitter account about once every day

Paolo: I can't seem to find those presentations. You don't have a copy of them do you?

~Rich

I don't. I only have saved the cached google copy

FYI, Hubble is presently studying Hartley-2 to try to pin down the basic properties of the nucleus, especially the rotation period, so that the information can be incorporated into mission planning.

http://www.stsci.edu/cgi-bin/get-visit-sta...rkupFormat=html
http://archive.stsci.edu/proposal_search.p...st&id=11990

Observations have also been carried out by Spitzer, but I have noy seen results published yet http://adsabs.harvard.edu/abs/2008sptz.prop50593L

A nice presentation "Remote Detection of Life on Earth ….inferences from EPOXI"

The article Alien Maps of an Ocean-Bearing World is now on arxiv

There is a mission update on the EPOXI site: http://epoxi.umd.edu/1mission/status.shtml

Characterizing Comet Hartley 2
Although the EPOXI mission's spacecraft is in a period of relative inactivity, the team is still actively working on a variety of questions. One of the key areas of investigation is the characterization of the next target, comet Hartley 2. Several investigations have been carried out to characterize the nuclear size and albedo, the large dust, and the rotation of the nucleus. These investigations have been aimed for the period before the nucleus begins outgassing significantly as it approaches the sun.

Observation were taken with the Spitzer Space Telescope in August 2008. The analysis of those data yields a nuclear effective radius of 0.6 km, slightly smaller than, but still comparable to, the size deduced using the European Infrared Space Observatory at the previous apparition. These observations also show that there is a trail of large dust particles released much earlier and still orbiting the sun close to the nucleus. This is a common phenomenon among comets.

The next step was an effort to determine the rotational period in order to design the observing sequence for the approach to the comet. A series of observations with the Hubble Space Telescope in late April were somewhat puzzling. Subsequent observations with a variety of ground-based telescopes, particularly with Gemini-South and Gemini-North on the same night, have suggested a rotational period near 2/3 day, but with narrow minima that were not caught in the HST observations.

From the latest Discovery and New Frontiers Newsletter

Although the EPOXI mission's spacecraft is in a period of relative inactivity, the team is actively working on a number of areas of interest, including characterizing the next target, comet Hartley 2.
Several investigations have been carried out to characterize the nuclear size and albedo, the large dust, and the rotation of the nucleus. These studies are timed for the period before the nucleus begins outgassing significantly as it approaches the sun. Another effort is to determine the Hartley 2’s rotational period to design the observing sequence for the approach to the comet. A series of observations with the Hubble Space Telescope in late April were somewhat puzzling. Subsequent observations with a variety of groundbased telescopes, particularly with Hawaii’s GeminiSouth and GeminiNorth on the same night, suggest a rotational period near 2/3 day, but with narrow minima that were not caught in the HST observations.
The team is preparing to continue its role in testing software that could lead to improved interplanetary network communications. Last fall, a NASAwide team used DisruptionTolerant Networking, or DTN, software to transmit dozens of space images to and from the Deep Impact spacecraft which was more than 20 million miles from Earth. The test was called DINET (Deep Impact DTN experiment). Computers on the ground at JPL were used to simulate stations on Earth, Mars, and the Martian moon Phobos. The experiment was successful, with all the data transmitted without corruption even as various faults and breakdowns in the system were simulated.
The team was pleased to support this activity that will ultimately lead to much better communications across the solar system. The Preliminary Design Review for DINET2 was conducted on May 13. The current timeline is being reviewed to determine when to begin DINET2 activities on the spacecraft. It may begin following the infrared imaging of Earth at high southern latitudes scheduled for August 17.

Published at last Spitzer Space Telescope Observations of the Nucleus of Comet 103P/Hartley 2

There was a somewhat distant Earth flyby of Epoxi on 29 June at some 1.3 million km ... distant yet Epoxi is still closer to Earth than Planck is at the moment. Next close-ish approach at the end of the year

A very short update on EPOXI's mission page

Browsing the DSN schedule (http://rapweb.jpl.nasa.gov/Planning/TMODMISS.pdf) I noticed that EPOXI is to conclude in November 2010 after the Hartley flyby, but the document gives a "probable end" date for the mission of 31 October 2011. Any idea what they plan to use the spacecraft for during the intervening year?

EPOXI trajectory from HORIZONS lasts till February 1, 2012. My program predicts several distant flybys of tiny asteroids and pass through cloud of Schwassmann-Wachmann comets:

I guess they could tweak spacecraft's trajectory and study some of these objects.

I wrote to EPOXI PI to ask for some clarifications and he tells me that

On ArXiv today A Search for Additional Planets in the NASA EPOXI Observations of the Exoplanet System GJ 436

I'm pretty sure the answer is "no" but I thought I'd check here...has there been a PDS release of any of the Deep Impact / EPOXI data from after the Tempel 1 encounter? Specifically, have any of the MRI or HRI images of Earth and/or Moon hit the PDS?

--Emily

http://pdssbn.astro.umd.edu/missions/epoxi/index.html

Nothing.

Hi all:

Just a quick update. EPOXI scientists have discovered water absorption features on the moon. The data was obtained from the IR spectrometer calibrations taken in December and twice in June. Chandryaan's M3 instrument also observed similar absorption features. This was published in Science yesterday. Read more here:
http://epoxi.umd.edu/2science/hydratedmoon.shtml

~Rich

Yet another EPOXI-related paper on arXiv:
Studying the atmosphere of the exoplanet HAT-P-7b via secondary eclipse measurements with EPOXI, Spitzer and Kepler

*cough*

Click to view attachment

Gamma-corrected, 650 nm "orange" (actually red), 550 nm green and 450 nm blue filter HRIV composite with channel mix to bring the channels to sRGB spec.

Err... anyone know of any good image deconvolution software?

Egads. Merry Christmas from EPOCh! Thanks for the heads up, Gordan. I think I'll sit this one out and watch you wizards try to make something better of these data

Now if I could only remember why I was asking that question in the first place...

--Emily

23 frames from March 18, 2008, covering over 5.5 hours, again motion-interpolated in an AVI file (1 meg). I believe there's material for a complete rotation as it goes on to March 19 so this is still a work in progress.

No one seems to have noticed this release yet
Sun Glints Seen from Space Signal Oceans and Lakes

Ooh, neat! More, higher resolution movies of Earth! Can't wait for it to hit PDS in about a couple of years from now!